180 Degree Elbow
180°elbow, 180Degree steel elbow, 180 Degree steel elbow, 180 degree elbow, 180 degree LR elbow, 180 degree stainless steel elbow, 180 degree carbon steel elbow, 180 degree alloy steel elbow,180 Degree SR elbow, 180 degree ASME B16.9 seamless elbow, 180degree bend, 180 degree bend pipe, 180 degree bend, 180°return.
An elbow is a pipe fitting installed between two lengths of pipe or tubing to allow a change of direction, usually a 180°,
90° or 45° angle, though 22.5elbows are also made. The ends may be machined for butt welding, threaded (usually female), or socketed, etc. When the two ends differ in size, the fitting is called a reducing elbow or reducer elbow.
Elbows are categorized based on various design features as below:
45 Degree Elbow --- where change in direction required is 45°
90 Degree Elbow --- where change in direction required is 90°
180 Degree Elbow--- where change in direction required is 180°
Seamless Elbow: Nps1/2” to 24”, DN15-DN600,
Butt Welded Elbows 24”-72”, DN600-DN1800
SCH10 to SCH160, XXS.
LR45degree, 90degree, 180degree.
SR5degree, 90degree, 180degree.
ASME B16.9, ASTM A234, ASTM A420,
ANSI B16.9, ANSI B16.25, ANSI B16.28,
MSS SP75, JIS B2311, JIS B2312, JIS B2313.
EN 10253-1, EN10253-2.
Grade and Material:
Stainless steel: ASTM A403 WP304,304L, 316, 316L, 321, 1Cr18Ni9Ti, 00Cr19Ni10, 00Cr17Ni14Mo2.
Alloy Steel: A234WP12, A234WP11, A234WP22, A234WP5, A420WPL6, A420WPL3.
←Previous: No Information
Next: Oil Casing Pipe→